Introduction
The Rewards & Recognition module in uKnowva HRMS allows organisations to create structured award programmes to recognise employee contributions, achievements, and performance. Whether you want to introduce a monthly recognition programme, celebrate work anniversaries, or reward employees for outstanding contributions, you can configure each award according to your organisation’s requirements.
uKnowva simplifies the process by providing a guided five-step setup. You can define the award details, choose the rewards employees will receive, configure eligibility and nomination rules, design a nomination form, and control how the organisation communicates the results. You can also save an award as a draft and complete its configuration later.
Follow the steps below to create and configure a new award programme in uKnowva HRMS.
Step 1: Open the Add Award Page
From the side navigation panel, navigate to the Awards menu and select Add Award sub-menu.

It will open the award creation page, where you can configure a new award programme through five sections: Award Info, Rewards & Eligibility, Workflow & Voting, Nomination Questions, and Visibility.
The page guides you through each section in sequence. Complete the required fields in the current section before moving to the next one.

You can also use the Previous and Next buttons at the bottom of the page to move between sections. If you are not ready to publish the award, select Save Draft to preserve your progress and continue configuring it later.
Step 2: Enter the Award Information
The first section, Award Info, contains the basic details of the award programme. Start by entering the Award Name. Choose a name that clearly communicates the purpose of the award, such as Outstanding Achiever.
Next, select the appropriate Award Category from the drop-down menu. The category helps classify the award according to its purpose or recognition type.

After selecting the category, choose the Frequency of the award. This setting determines how often the programme runs. Depending on your requirements, you can configure an award to run monthly, quarterly, half-yearly, yearly, or as an event-based award.

Enter an Award Description to explain what the award recognises and what employees should understand about the programme. A clear description helps employees understand the purpose of the award before participating in the nomination process.
Finally, use the Publish On field to select the date on which you want to publish the award. If you select a future date, the award will show a Scheduled status and will be published automatically on that date.

You can also leave it blank if you wish to publish it right away.
Once you have entered the required information and reviewed the details, click Next to proceed to the Rewards & Eligibility section.
Step 3: Configure Rewards and Eligibility
The Rewards & Eligibility section allows you to decide what the winner will receive and which employees can qualify for the award. This section contains two main parts: What the Winner Receives and Eligibility Criteria.
What the Winner Receives
Under What the Winner Receives, select the reward type you want to associate with the award. You can choose Monetary, Non-Monetary, or Both, depending on how you want to recognise the winner.

If you select Monetary, enter the reward Amount (up to 100,000) and choose the appropriate Currency from the drop-down menu.

Next, select the Deposit To (Salary Head) field to specify the salary head under which uKnowva should process the monetary reward. This setting determines where the award amount will appear in the winner's payroll. The amount entered must be more than zero, and the Deposit To (Salary Head) must be selected.

You can also configure how the system handles a tie. If you want to divide the monetary reward between employees who share the winning position, enable the Split reward between tied co-winners toggle.

This allows the system to split the reward among tied winners instead of awarding the full amount to each person.
If you select Non-Monetary, enter the number of Points the winner will receive. These points are added to the employee's recognition points total. You can assign between 1 and 1,000 points.
If the award allows multiple employees to share the winning position, enable Split reward between tied co-winners to divide the points among the tied co-winners.

The points entered must be a whole number and equal to 1 or more.
If you select Both, configure the details for both reward types. Enter the monetary amount, select the currency and salary head, and specify the recognition points. You can also enable the split reward setting where required so that the system handles tied co-winners according to your chosen configuration.

Eligibility Criteria
After configuring the reward, move to the Eligibility Criteria section. Here, you can define which employees are eligible to be nominated for the award by setting conditions based on their employee details
Click Add rule to create an eligibility condition. To combine multiple conditions, use Add group. You can then apply AND/OR Conditions to control how the rules work.
Use AND conditions when an employee must satisfy multiple criteria together. Use OR conditions when an employee can qualify by meeting any one of the specified conditions.

If you leave the eligibility criteria empty, the award remains open to everyone. Once you have configured the reward and eligibility settings, click Next to move to Workflow & Voting.
Step 4: Configure Workflow and Voting
The Workflow & Voting section allows you to define who can nominate employees, whether nominations require approval, how the system handles previous winners and ties, and whether a voting committee will participate in selecting the winner.

Configure Nomination Rules
Start with the Nomination By field. Select the user groups that should have permission to nominate employees for the award. This setting determines which groups of employees can participate in the nomination process.

If you want to allow specific individuals to nominate employees, use Nomination By - Specific People and select the required employees. You can configure this alongside the user group selection according to your nomination requirements.

At least one of the following options must be configured to allow the award to be saved: Nomination By, Nomination By - Specific People, or Allow Reporting Managers to Nominate. Make sure you configure at least one of these nomination sources.
To include reporting managers as a nomination source, select the appropriate option under Allow Reporting Managers to Nominate?:
Not Allowed disables nominations through reporting manager access. Except Their Superiors allows reporting managers to nominate employees but excludes their own superiors from the eligible nominees. Including Their Superiors allows reporting managers to nominate employees, including their superiors.

When Allow Reporting Managers to Nominate is set to Except Their Superiors and a Nomination By group is selected, the Can reporting managers in this group nominate their superiors? option appears. Select Yes to allow them to nominate their superiors or No to restrict such nominations.

Next, configure Nominations per Nominator to set how many different employees an individual can nominate during a cycle. Leave this field blank to allow unlimited nominations.

If you want to restrict participation, enter the maximum number of nominations each nominator can submit.
Configure the Approval Workflow
If you want nominations to go through an approval process, first enable Do you want a Nomination Approval Workflow?

Once enabled, the Approval Workflow field appears with Rewards and Recognition - Nomination Approval selected by default.

Click the eye icon beside the workflow to open it and configure the approvers responsible for reviewing and approving nominations.


You can also decide whether employees can nominate themselves. Enable the Allow Self Nomination toggle if you want employees to be able to nominate themselves for the award. Keep it disabled if you want nominations to come only from other eligible individuals. By default, this setting follows the global configuration under Award Settings.

To prevent the previous cycle's winner from being nominated again in the current cycle, enable the Block Previous Cycle's Winner toggle. This ensures that the previous winner cannot be nominated for the award in the next cycle.

Set the Nomination Period
Use the Nomination Starts On field to select the date on which employees can begin submitting nominations. Then, select the Nomination Ends On date to define the nomination deadline.
For Event-Based awards, both dates are fixed. For repeating awards, the nomination dates recur with each cycle. Make sure the Nomination Ends On date is on or after the Nomination Starts On date. The Nomination Starts On date must also be on or after the award's Publish On date.

Decide What Happens When the Cycle Closes
Under What Happens When This Cycle Closes, configure how uKnowva should declare the winner after the nomination or voting process ends.
Enable the Declare Winner Automatically? toggle if you want the system to declare the winner automatically when the cycle closes. If this option is disabled, an authorised user can select the winner later using Mark Winner.

The Allow multiple winners toggle appears when Declare Winner Automatically? is disabled. Enable it if you want to mark multiple winners for the award. Marking a winner will not close the nomination cycle, allowing you to select additional winners.

You must also configure how the system should handle a tie.
Under the tie-handling options, select the appropriate method. These options apply only when the winner is declared automatically. Choose Every Tied Nomination Wins if you want all tied nominees to receive the award. Alternatively, select Send for Approval if you want the tied result to go through an approval process before the organisation finalises the winner.

If you select Send for Approval, choose the required Tie Approval Workflow to determine how the organisation reviews and settles the tied result. The field is pre-filled with the ready-made Rewards and Recognition - Tie Approval workflow. You must select a workflow to save the Send for Approval option.

Enable and Configure the Voting Committee
Next, decide whether the award should include a voting committee. Enable the Enable Voting Committee toggle to allow designated committee members to vote on approved nominees.

When this option is disabled, the page displays No voting stage. The most-nominated nominee wins. This means the nominee with the highest number of nominations wins without a separate voting process.
When you enable the voting committee, configure the Voting Committee field by selecting at least one user group or individual who will participate in the voting process. Use Voting Committee - Specific People to include particular individuals.
In the Votes per Committee Member field, enter the number of nominees each committee member can vote for. The value must be at least 1.

Next, enter the number of days in Voting runs for N days after nominations close. This determines how long the voting period remains open. The value must also be at least 1. Voting opens the day after the nomination period closes. For example, if you enter 4 days, the committee can cast votes during the four-day voting period following the nomination deadline.

Once you have configured the nomination rules, approval workflow, cycle closure settings, and voting committee, review the information. Click Next to continue to the Nomination Questions section.
If you are not ready to complete the award, click Save Draft to save your progress. You can also use Previous to return to the earlier section and make changes. These navigation and save options are available at the bottom of the page and can be used while configuring the award.
Step 5: Design the Nomination Questions
The Nomination Questions section allows you to design the form that nominators must complete when they nominate an employee. This form helps you collect the information required to understand why someone deserves the award.
The page provides a question builder similar to uKnowva's workflow form builder. You will find the available fields on the left side of the screen and the form-design area on the right.
The form starts with two default questions, Project or Initiative and Key Contributions, along with a Supporting Documents field. You can edit or remove these default fields based on the information you want to collect from nominators.

To add a question, drag the required field from the list on the left and drop it into the form area on the right.
You can use fields such as Text Field, Text Area, Email, Date/Time, and uKnowva Fields, among other available options. Configure and edit each field according to the information you want nominators to provide.

For example, you can add a text field to collect a short response.

Arrange the questions to create a clear and relevant form that nominators can complete easily.
Once you have added and configured the required fields, review the form to ensure that it collects all the necessary information. Click Next to proceed to the final section, Visibility.
Step 6: Configure Visibility and Communication Settings
The final section, Visibility, allows you to decide how uKnowva communicates the award and displays the winner's recognition across the platform.
Visibility & Communication
Under Visibility & Communication, you will find several toggle settings that control what happens when the award is announced.
Enable Generate Certificate if you want uKnowva to generate a certificate for the winner. If enabled, select the required certificate template. These templates are letter templates managed within HRMS.

Enable Display on Employee Timeline to show the award win on the winner's own employee profile timeline. This recognition is visible only on the winner's profile.
Turn on Post in Network Wall if you want uKnowva to publish a congratulations post on the Network Wall. The post is visible to everyone who has access to view the wall.
Enable Send Mail to send a congratulations email to the winner. Enable Send Notifications to send in-app notifications for award-related updates, including nomination and voting reminders, as well as the winner announcement.

Review these settings and enable the communication and visibility options that suit your organisation's recognition process.
Menu Setting
The Menu Setting section allows you to add a dedicated menu item for the award to the left navigation panel.

If you want employees to access the award directly through the side navigation, enable the Add a Menu Item for this Award toggle. This creates a dedicated menu entry for the award, making it easier for employees to find and access it.
Once enabled, configure the menu item by entering a Title (required) and selecting the relevant user groups under Accessible To. The menu item is automatically placed under Awards, so no parent selection is required.
Leave Accessible To empty if you want everyone to access the menu item.
Once you have configured the visibility and menu settings, review the entire award configuration before publishing it.

Step 7: Review and Publish the Award
After completing all five configuration sections, review the award details to make sure you have entered the correct information.
When you have reviewed all the details and are ready to make the award available, click Submit & Publish. You can also click Cancel to exit without publishing or Clear Draft to remove the saved draft, if one exists.

Conclusion
That's it!
You've now successfully created and configured an award programme in uKnowva HRMS.
By following this process, you can define the award's purpose, choose suitable rewards, establish employee eligibility, manage nomination and approval rules, configure voting, and design a nomination form that captures the required information.
If you have any questions or need additional support, feel free to contact us at This email address is being protected from spambots. You need JavaScript enabled to view it..



